This is topic Comparison of two Elmo projectors in forum 16mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=001497
Posted by Harvey Philip Alten (Member # 5585) on September 26, 2016, 09:36 AM:
I currently own an Elmo 16CL Xenon projector with a 250-watt lamp and I have seen Elmo Xenon CX-350's (350-watt lamps) for sale in the range of $2200-$2500. My screen is 8 feet wide and I was curious if I would notice much of an increase in brightness with the CX-350?
Posted by Jim Schrader (Member # 9) on September 26, 2016, 10:36 AM:
Harvey Leon Norris is in your neighborhood give him a call he's a Elmo official repair person he would be your best bet he's a real friendly guy if you don't get through keep trying his line is hooked up to his fax just keep trying here's is his number
1 (610) 272-3205
Posted by Harvey Philip Alten (Member # 5585) on September 26, 2016, 11:40 AM:
Thank you very much, Jim.
Posted by Kenneth Horan (Member # 3) on September 28, 2016, 08:30 PM:
I own both projectors and I would say the difference in brightness is negligible. The CX-350 does have a douser. This comes in handy when showing shorts as you don't have to restrike the lamp each time.
Posted by Winbert Hutahaean (Member # 58) on September 28, 2016, 09:57 PM:
If you have a 16CL Xenon, stick on that, as this one is much handy than CX.
Guys, just want to take advantage of this post, I have scope lens bracket for each Elmo projector (16 CL or CX series) should you need ones.
cheers,
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2