8mm Forum: EIKI 16-CL anamorphic scope holders

»	8mm Forum » 16mm Forum » EIKI 16-CL anamorphic scope holders

UBBFriend: Email this page to someone!

Author

Topic: EIKI 16-CL anamorphic scope holders

Edwin van Eck
Master Film Handler

Posts: 312
From: Tilburg, Netherlands
Registered: Feb 2015

posted May 03, 2018 06:14 AM

Upon several requests from members of this forum we have developed a new (3d-printed) anamorphic (scope) lens holder for the ELMO 16-CL projectors.

For more info: https://shop.van-eck.net/PP-0243.html?_globalsearch=pp-0243

Anyone knows if this scope holder can also be used for other projectors?

--------------------
Edwin van Eck
Van Eck Video Services

| IP: Logged

Bill Brandenstein
Phenomenal Film Handler

Posts: 1632
From: California
Registered: Aug 2007

posted May 03, 2018 12:36 PM

Edwin, you never cease to amaze!

So folks, if you click at his link, you'll see there are multiple sizes available depending on the lens you're using.

However, how does it attach to the projector?

| IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007

posted May 03, 2018 02:37 PM

It attaches as does the Elmo scope lens.
On the front of the projector are two holes, one above the other. The top hole is for a locating pin, the lower hole has a screwed thread into which the screw is inserted and tightened up.
If you go to the site you can enlarge the photos which show in more detail.

--------------------
Maurice

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2