8mm Forum: Eiki SL2 parasite noise

»	8mm Forum » 16mm Forum » Eiki SL2 parasite noise

UBBFriend: Email this page to someone!

Author

Topic: Eiki SL2 parasite noise

Pierre Mdihi
Film Handler

Posts: 86
From: Strasbourg, France
Registered: Jan 2019

posted May 23, 2019 08:41 PM

I just bought a eiki SL-2. After cleaning it, put a new belt, replace the lamp and change a broken fuse, it's working fine . But the problem is a parasite noise, it's seems to coming from the motor. The noise appear wenn it's plugged.

The knob (switch) seems very hard to turn in projecting position, , is it normal ?

What your opinion about this projector compare to the eiki rt1? Because i want to make space.

| IP: Logged

Terry Sills
Phenomenal Film Handler

Posts: 1423
From: Weymouth,Dorset,England
Registered: Oct 2012

posted May 24, 2019 01:03 AM

Did you buy it from a flea market? [Big Grin]

| IP: Logged

Pierre Mdihi
Film Handler

Posts: 86
From: Strasbourg, France
Registered: Jan 2019

posted May 24, 2019 04:12 AM

Yes, this month i was very lucky to found many projector, super 8 and 16mm. But unlucky that they all have a small problem. I managed to repair some of them but the other like this one, I'm stuck. Buying from none collectionneur is a bet every time. This is the charm of flea market.

| IP: Logged

Dominique De Bast
Film God

Posts: 4486
From: Brussels, Belgium
Registered: Jun 2013

posted May 24, 2019 07:25 AM

This projector also plays magnetic films, so it's nice for scopitones. What I don't like with it (I don't own one myself but the 9.5 club has a modified machine and uses it for the monthly projections) is that if the film is a little damaged, it stops abrutly. My Fumeo had also a noise (like if it was acting like a radio) but recently this has stopped, I don't know why (maybe the source of waves has disappeard ?)

--------------------
Dominique

| IP: Logged

Pierre Mdihi
Film Handler

Posts: 86
From: Strasbourg, France
Registered: Jan 2019

posted May 24, 2019 01:58 PM

I hope this radio sound will stop soon. I bought the SL-2 because it's seems more gentle with the film in contrary with the eiki RT-1 particularly for old movie. Have you some idear about the knob problem ? ( i try to grease this part but no amelioration)

Now i have a bauer p6, two rt1 et the SL-2, i want to keep just two projector to watch film (i'm not intrested in scopitone). Which one to keep ?

[ May 25, 2019, 07:03 AM: Message edited by: Pierre Mdihi ]

| IP: Logged

Dominique De Bast
Film God

Posts: 4486
From: Brussels, Belgium
Registered: Jun 2013

posted May 24, 2019 02:32 PM

I don't know the Bauer, so I will be interested to read the advices.

--------------------
Dominique

| IP: Logged

Tom Photiou
Film God

Posts: 4837
From: Plymouth U.K
Registered: Dec 2003

posted May 24, 2019 03:49 PM

I have one of these great machines, while it could be annoying that it shuts down if the film is badly damaged, but all i can say about that is, ensure the films going through it are not so badly damaged that it needs to shut down. As for the stiffness in the switch etc, it sounds like it needs a good full service to bring it up to scratch. All the threading levers etc sounds like they need cleaning and re-greasing. Same with the loop restorer. Mine was the same but after a good service all is now 100%.

[ May 25, 2019, 12:22 PM: Message edited by: Tom Photiou ]

| IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007

posted May 25, 2019 02:16 AM

quote:
I want to keep just two projectors

Pierre
My suggestion is to keep two Eiki projectors, the SL-2, and the better of the two RT-1 projectors. Both use the same lamp, the ELC.
The SL-2 is a slot loader with larger sprockets and is quite kind to film.

--------------------
Maurice

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2