8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm equipment for sale/trade   » Marc 300/16 Lamps

 - UBBFriend: Email this page to someone!    
Author Topic: Marc 300/16 Lamps
Barry Attwood
Phenomenal Film Handler

Posts: 1411
From: Enfield, U.K.
Registered: Aug 2003


 - posted July 30, 2008 04:15 AM      Profile for Barry Attwood   Email Barry Attwood   Send New Private Message       Edit/Delete Post 
I've had come in with some equipment 4 of these Marc 300/16 lamps (they are GE Lamps, made in the U.S., if that's a help), they look as if they may have been used (1 at least), but I'm no expert on these lamps, but if anyone would like to take a chance, I want £25 plus post, they may make great back up lamps. So if interested contact me at indi8films@aol.com .

[ July 30, 2008, 03:41 PM: Message edited by: Barry Attwood ]

 |  IP: Logged

Steven Sigel
Jedi Master Film Handler

Posts: 701
From: Massachusetts
Registered: Jun 2003


 - posted July 30, 2008 02:29 PM      Profile for Steven Sigel   Email Steven Sigel   Send New Private Message       Edit/Delete Post 
FYI - those are not Xenon lamps, they're MARC (Mercury ARC).

You might also want to indicate which variety of MARC 300 lamps they are... There's EZM Marc 300/16 , and EZG Marc 300/16A (aka GEMINI) (IIRC).

[ July 30, 2008, 10:20 PM: Message edited by: Steven Sigel ]

 |  IP: Logged

Barry Attwood
Phenomenal Film Handler

Posts: 1411
From: Enfield, U.K.
Registered: Aug 2003


 - posted July 30, 2008 03:46 PM      Profile for Barry Attwood   Email Barry Attwood   Send New Private Message       Edit/Delete Post 
Dear Steven,

I have altered my listing, I'm afraid this is the first time I've had in this kind of lamp, and my knowledge is very basic in this field. I'm afraid I don't know what type they are either, although I have the original box, all it has on it is Marc-300/16 projection, I cannot see any other coding, still someone on the forum might know which ones I have, here's hoping.

 |  IP: Logged

Josef Grassmann
Expert Film Handler

Posts: 190
From: Hennef-Sieg, Germany
Registered: Apr 2005


 - posted October 09, 2008 05:21 PM      Profile for Josef Grassmann   Author's Homepage   Email Josef Grassmann   Send New Private Message       Edit/Delete Post 
EZM has on both sides one ceramic cup glued on
EZG has one ceramic cup on one side and two cups on the other side

 |  IP: Logged

Jim Carlile
Film Handler

Posts: 95
From: Burbank, California, USA
Registered: Apr 2007


 - posted November 28, 2008 02:15 AM      Profile for Jim Carlile     Send New Private Message       Edit/Delete Post 
It shouldn't tell tales out of school or blow a good deal for someone, but don't cheat yourself. Those lamps are VERY valuable and expensive. Like $300. They were discontinued awhile back, too.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2