8mm Forum: Elmo repairs

Topic Closed

»	8mm Forum » General Yak » Elmo repairs

UBBFriend: Email this page to someone!

Author

Topic: Elmo repairs

Michael Hyde
Film Handler

Posts: 45
From: Dudley, West Midlands. UK
Registered: Dec 2006

posted September 01, 2015 08:04 AM

Thanks Steve, by slow,i mean real slow,not even enough torque to feed film into gate,no signs of smoke or smells,was working fine till stored

| IP: Logged

Mathew James
Jedi Master Film Handler

Posts: 740
From: Hamilton, Ontario, Canada
Registered: Dec 2014

posted September 01, 2015 08:37 AM

Have you check the belts? Maybe one is stretched...

btw- this thread is confusing....I see no history of conversation?

--------------------
--
Cheers,
Matt 📽

| IP: Logged

Andrew Woodcock
Film God

Posts: 7477
From: Manchester Uk
Registered: Aug 2012

posted September 01, 2015 08:43 AM

Look under General Yak section Mathew.
There is a previous post called Elmo repairs, same as this one, in which Steve replied to Michael..then there was another post called repairs that was the first to this topic which I restored once the topic had been brought back to life by Michael.

Paul Browning has very kindly offered his help to Michael with this as he lives quite close by.

--------------------
"C'mon Baggy..Get with the beat"

| IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003

posted September 01, 2015 11:40 AM

I'm going to Elmo Repairs (the original)

This is getting complicated!

--------------------
All I ask is a wide screen and a projector to light her by...

| IP: Logged

Douglas Meltzer
Moderator

Posts: 4554
From: New York, NY, USA
Registered: Jun 2003

posted September 01, 2015 12:31 PM

This topic continues here.

[ September 01, 2015, 08:24 PM: Message edited by: Douglas Meltzer ]

--------------------
I think there's room for just one more film.....

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2