8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » General Yak   » Sprocket problem in Eumig 824

- UBBFriend: Email this page to someone!    
Author Topic: Sprocket problem in Eumig 824
Panayotis A. Carayannis
Jedi Master Film Handler

Posts: 969
From: Athens,Greece
Registered: Jul 2008

- posted November 18, 2019 03:03 PM      Profile for Panayotis A. Carayannis     Send New Private Message       Edit/Delete Post 
In my Eumig 824, both upper and lower sprockets are running free. They lock in their axis (!) but can run them with my finger Don't know if I am expressing this properly.Seems like the gears from the inside are not connecting with each other. HELP!

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2