8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 9.5mm Forum   » Voltage controller for Specto 8mm

- UBBFriend: Email this page to someone!    
Author Topic: Voltage controller for Specto 8mm
Don Mason
Junior
Posts: 5
From: Devon UK
Registered: Aug 2012

- posted August 30, 2012 03:31 AM      Profile for Don Mason   Email Don Mason   Send New Private Message       Edit/Delete Post 
Can anyone advise me on where I can purchase a voltage controller(230v-250v) for my newly acquired 8mm Specto projector. On connecting this projector to the mains, a muffled explosion took place followed by wisps of smoke. On removing the base cover, I could see it was this unit that had failed. All replies received gratefully. [Confused]

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2