8mm Forum: Pathescope Ace belt of motor

»	8mm Forum » 9.5mm Forum » Pathescope Ace belt of motor

UBBFriend: Email this page to someone!

Author

Topic: Pathescope Ace belt of motor

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013

posted November 21, 2018 02:55 PM

As I said here:
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=10;t=000161
I look for motor belt of Pathescope Ace.
I could find one of the same size, but my belt is too deformed, I can't take the exact measurements: does anyone know them?
Maybe another projector, perhaps of the same Pathé, has the same belt, or maybe another model.
Thank you. [Smile]

| IP: Logged

Ken Finch
Jedi Master Film Handler

Posts: 543
From: Herne Bay, Kent. U.K.
Registered: Oct 2011

posted November 25, 2018 08:54 AM

Ace motor belt diameter = 5" or 2.5 to 3cms. Ken Finch.

| IP: Logged

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013

posted November 25, 2018 06:13 PM

Thanks, Ken. A few days ago I ordered a pair of o-rings (paid very little) of the right size. I noticed that the original Pathescope Ace motor belt was square form, but I don't think there are problems with the round ones.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2