8mm Forum: Pathescope Ace belt of motor

This is topic Pathescope Ace belt of motor in forum 9.5mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=9;t=000476

Posted by Luigi Castellitto (Member # 3759) on November 21, 2018, 02:55 PM:

As I said here:
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=10;t=000161
I look for motor belt of Pathescope Ace.
I could find one of the same size, but my belt is too deformed, I can't take the exact measurements: does anyone know them?
Maybe another projector, perhaps of the same Pathé, has the same belt, or maybe another model.
Thank you. [Smile]

Posted by Ken Finch (Member # 2768) on November 25, 2018, 08:54 AM:

Ace motor belt diameter = 5" or 2.5 to 3cms. Ken Finch.

Posted by Luigi Castellitto (Member # 3759) on November 25, 2018, 06:13 PM:

Thanks, Ken. A few days ago I ordered a pair of o-rings (paid very little) of the right size. I noticed that the original Pathescope Ace motor belt was square form, but I don't think there are problems with the round ones.

UBB.classic^TM 6.3.1.2