8mm Forum: Grease Re-Recording..Success! Kind of...

»	8mm Forum » 8mm Forum » Grease Re-Recording..Success! Kind of... (Page 2)

UBBFriend: Email this page to someone!

This topic comprises 2 pages: 1 2

Author

Topic: Grease Re-Recording..Success! Kind of...

James N. Savage 3
Phenomenal Film Handler

Posts: 1375
From: Washington, DC
Registered: Jul 2003

posted May 04, 2005 10:27 AM

Michael- I have been re-recording on the Sankyo ST-800 and I didnt even know about the speed adjustment capability! Thats good news.

Actually, I've had very good results as far as syncronizing goes. I have actually had a full 400 foot reel stay in sync one time. But I usually have to stop and start 3 or 4 times per 400 foot reels (not including digests, of course).

Nick.

| IP: Logged

Mike Peckham
Phenomenal Film Handler

Posts: 1461
From: West Sussex, UK.
Registered: Jun 2003

posted May 04, 2005 10:41 AM

It is possible to drill a couple of small holes in the end panel on a Sankyo Stereo 800, this will enable you to access those little speed adjustment pots with a small screwdriver without taking the back off.

I wouldn't recommend it though as they really are only meant for setting up purposes and I doubt that they would last long if they were used for constant adjustment.

Mike

--------------------
Auntie Em must have stopped wondering where I am by now...

| IP: Logged

All times are Central

This topic comprises 2 pages: 1 2

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2