Author
|
Topic: Just charming
|
|
|
|
|
Hugh Thompson Scott
Film God
Posts: 3063
From: Gt. Clifton,Cumbria,England
Registered: Jan 2012
|
posted November 26, 2012 01:00 PM
Before you make any decisions Vidar,punch in GS 1200 into the "search" at the top of the page, and it will reveal all the pro's and cons of this particular machine.As you live in Norway,it might be difficult to get repairs done if anything goes wrong.and with this projector it will.Read all the posts and then decide.Myself, I favour Fumeo,but they are expensive, the Elmo ST machines are quite reliable and show a mean picture,just beware of those tracks.
| IP: Logged
|
|
|
Hugh Thompson Scott
Film God
Posts: 3063
From: Gt. Clifton,Cumbria,England
Registered: Jan 2012
|
posted November 26, 2012 02:32 PM
I totally agree Michael, the ST's were like a scaled down 16mm machine, and are very workmanlike, solid and dependable.A straight forward design,that isn't over complicated and as I've said before, is a showmans machine.As Vidar will see in the previous posts, a forum could have been set up just on the GS alone, and lets face it,repairs aren't cheap even if you can get the parts or someone willing to fix it.The info is there Vidar,read and take on board all the points because it could be a very expensive decision.
| IP: Logged
|
|
|
|
|
|
|
|
|
|
|
|