8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » eumig 810d question

- UBBFriend: Email this page to someone!    
Author Topic: eumig 810d question
John Yapp
Expert Film Handler

Posts: 148
From: Telford England.
Registered: Dec 2011

- posted October 30, 2013 01:41 PM      Profile for John Yapp   Email John Yapp   Send New Private Message       Edit/Delete Post 
I have been using this old machine for telecine work for some time, and recently noticed that when projecting Standard 8mm films, there is quite a bit of Jitter that doesn't seem as bad with super 8mm. I find that if I loosen the film on the feed spool it goes through much smoother. Is there anything I should be looking to adjust?

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2