8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » EUMIG DL projector

- UBBFriend: Email this page to someone!    
Author Topic: EUMIG DL projector
John Grieve
Junior
Posts: 2
From: Blackheath, NSW, Australia
Registered: Jul 2016

- posted February 02, 2017 01:29 AM      Profile for John Grieve   Email John Grieve   Send New Private Message       Edit/Delete Post 
The control knob on this projector when I turned it the other day, suddenly became loose and now doesn't do anything and has lost the 'resistance' it had and doesn't switch any functions.

 |  IP: Logged
Will Trenfield
Jedi Master Film Handler

Posts: 506
From: Shrewsbury, Shropshire, UK
Registered: Mar 2016

- posted February 02, 2017 04:33 AM      Profile for Will Trenfield   Email Will Trenfield   Send New Private Message       Edit/Delete Post 
My guess is that the plastic collar on the knob which goes onto the control shaft has split. If you can't repair it, replacements are available. See here http://shop.van-eck.net/PP-0142.html

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2