8mm Forum: For sale Elmo GS1200

»	8mm Forum » 8mm equipment for sale/trade » For sale Elmo GS1200

UBBFriend: Email this page to someone!

Author

Topic: For sale Elmo GS1200

Ugo Grassi
Jedi Master Film Handler

Posts: 506
From: Avellino (Italy)
Registered: Dec 2003

posted December 30, 2003 07:54 AM

An other GS1200 is coming to my home. Does someone want it?
The price is 1000 eu. more shipping cost. It comes with 1.1 lens, and - if you want - a two 45° blades shutter; or three blades with blades at 45° instead the original 53°, for more light. No flickering comes from the new shutter! Of course the two blades is for 24 ft/s only.

Here for the price in sterling pounds
http://it.finance.yahoo.com/m5?a=1000&s=EUR&t=GBP&c=0
and for USA dollars
http://it.finance.yahoo.com/m5?a=1000&s=EUR&t=USD&c=0

Check here for the shipping charge
http://www.posteitaliane.it/postali/pacchi_estero/tariffe.shtml
here to identify the zone
http://www.posteitaliane.it/postali/pacchi_estero/zone.shtml

[ January 09, 2004, 10:49 AM: Message edited by: Ugo Grassi ]

| IP: Logged

Ugo Grassi
Jedi Master Film Handler

Posts: 506
From: Avellino (Italy)
Registered: Dec 2003

posted January 07, 2004 06:36 AM

For Ronnie Tanhueco:
It's impossible for me answer to your mail because I receive this error message:

- These recipients of your message have been processed by the mail server:
ronnie@xxxx.xxx; Failed; 5.1.1 (bad destination mailbox address)

Remote MTA mail.logicalt.com: SMTP diagnostic: 550 5.2.1 Mailbox unavailable. Your IP address 193.70.xxx.xx is blacklisted using REYNOLDST1. Details: PLEASE SEE http://dnsbl.net.au/lookup/?193.70.xxx.xx.

--------------------
Bye
Ugo

| IP: Logged

Steven Sigel
Jedi Master Film Handler

Posts: 701
From: Massachusetts
Registered: Jun 2003

posted June 13, 2012 11:10 PM

Hi Ugo -
Sorry to hijack your thread, but I was wondering if you might have any clues on a problem I'm having. I've got a GS-1200, the optical sound is fine, but when playing magnetic sound, if the volume is low, it's o.k., but if you turn it up, there is a squeal almost like a feedback loop. Any ideas? Thanks!!

| IP: Logged

Pasquale DAlessio
Film God

Posts: 3523
From: Bristol,RI, USA
Registered: May 2010

posted June 16, 2012 12:51 PM

Steve

Broken ground maybe? [Confused]

PatD

| IP: Logged

Bill Brandenstein
Phenomenal Film Handler

Posts: 1632
From: California
Registered: Aug 2007

posted June 19, 2012 12:15 AM

Oxidized knobs or record switches? Run it fully on with no film and exercise all the switches and knobs.

Anyone ever tried Deoxit on these?

| IP: Logged

Bruce Wright
Expert Film Handler

Posts: 140
From: Denham Springs, La.
Registered: Oct 2011

posted June 19, 2012 10:21 AM

I use Deoxit when repairing old tube type equiptment and it works very well. Know that a little goes a long, long way.
Also used on my Elmo and Eumig.

--------------------
Bruce Wright

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2