Mark Todd
Film God
Posts: 3846
From: UK
Registered: Aug 2003
|
posted December 16, 2004 09:28 AM
Hi this is for an average to good condition Elmo ST1200D, it needs a bit of a set up around the top sprocket and there is a noise in the back I believe to be it needing a new rubber cluch roller thing available from Tom for about £6 I believe.In fair running order, all fires up etc and threader relases and so on.
Handily its the later one in silver and also the one without the shutter rubber so thats good as you won`t have to worry about that, the mechanism seems to be sweet behind the rubber job noise and runs well.
Its magnetic sound and the amp appears to be OK and the take up from what I can tell.
Selling sold as seen for spares or repair but a small amount of tinkering it should do well as basically sound enough.
£65 in the UK, I`d appreciate a couple of £`s if paypal.
Only selling as funnily enough doing more in std 8 silent features at the moment so would consider part trade for nice ones of those.
A snip for the price but it does need a lead, from £1 to £5 depending where you go, I think the £1 shop have them on and off, usual euro job.I may be able to dig one out.
Best Mark.
| IP: Logged
|
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
