8mm Forum: FS: Elmoscope lens

»	8mm Forum » 8mm equipment for sale/trade » FS: Elmoscope lens

UBBFriend: Email this page to someone!

Author

Topic: FS: Elmoscope lens

Rob Koeling
Master Film Handler

Posts: 399
From: Brighton, UK
Registered: Jun 2003

posted February 01, 2008 08:38 AM

I recently got an Elmoscope anamorphic lens. I expected it to be a 53mm (D), but found out it is a 43mm (C) size.
I haven't got a bracket for this size, so let it go.

Email me if interested.

- Rob

| IP: Logged

Joerg Polzfusz
Jedi Master Film Handler

Posts: 815
From: Berlin, Germany, Europe, Earth, Solar System
Registered: Apr 2006

posted February 01, 2008 11:12 AM

Hi,

that's strange as both the Elmoscope I and Elmoscope II are listed as having a 52mm-rear-connector in the Super8wiki?! http://super8wiki.com/index.php/Anamorphic_Lenses#2x_Anamorphic_attachments

Jörg

| IP: Logged

Rob Koeling
Master Film Handler

Posts: 399
From: Brighton, UK
Registered: Jun 2003

posted February 01, 2008 12:05 PM

That was what I thought (but I got my information from the wiki), so I hadn't bothered to ask about that...

(it's a lovely lens, though)

- Rob

| IP: Logged

Hans van der Sloot
Master Film Handler

Posts: 425
From: the Netherlands
Registered: Nov 2005

posted February 02, 2008 04:39 PM

Hi Rob,

Sorry to hear the lens doesn't fit.
If only I knew for which projector you were going to use it for.
I added the Bell & Howell lens to indicate which lenses it would fit.

But at least I can confirm it's a beautiful lens.

Hans

| IP: Logged

Rob Koeling
Master Film Handler

Posts: 399
From: Brighton, UK
Registered: Jun 2003

posted February 04, 2008 07:11 AM

No worries, Hans. I wanted to upgrade my current scope lens. Same barrel would have been nice, but I should have checked with you.

I there are no takers, I'm going to get myself a 'C' sized bracket (or an adaptor ring). It won't sit idle for long!

- Rob

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2