8mm Forum

my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm equipment for sale/trade   » Wanted: Elmo GS1200 parts

 - UBBFriend: Email this page to someone!    
Author Topic: Wanted: Elmo GS1200 parts
Clive Carmock
Film Handler

Posts: 69
From: London, UK
Registered: Feb 2005

 - posted June 12, 2012 05:01 PM      Profile for Clive Carmock   Email Clive Carmock   Send New Private Message       Edit/Delete Post 

I am looking for a replacement fan motor and ideally fan assembly unit for an Elmo GS1200 Xenon.

The plastic fan blade had cracked on my machine. I was able to repair it with some epoxy resin glue, but it's failing again in the same place. I am also concerned that the vibration due to imbalance is damaging the fan motor bearings as they are starting to squeal.

So I am seeking to replace as much of this as I can.....

 |  IP: Logged

Larry Arpin
Jedi Master Film Handler

Posts: 953
From: Sunland, CA, USA
Registered: Dec 2006

 - posted June 12, 2012 07:19 PM      Profile for Larry Arpin   Author's Homepage   Email Larry Arpin   Send New Private Message       Edit/Delete Post 
Is the fan in a regular GS the same as the Xenon?

 |  IP: Logged

All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation