Posts: 3523
From: Bristol,RI, USA
Registered: May 2010
posted November 15, 2012 03:41 PM
I need a cooling fan blade for a Revere AP 828 8mm projector. I would imagine a blade from another brand would work if the size is right. The dimensions are 2 3/4 diameter, 1" deep, 1/4" shaft hole. Plastic or metal will work. If you have parts projectors around with this type of blade please let me know. I have attached a pic. Thanks in advance.
These wheels are meant for counter-clockwise rotation and since the pitch of your blades looks opposite from the picture in their website I'd say you have a clockwise wheel (...or about 3/4 of one!).
This could make a difference if for example instead of forcing the hot air around the bulb out the top it's pulling it inside the machine and making all the stuff in there run a little hotter.
Since you have a silent machine you may get away with this. Semiconductors hate heat, but without an amp in there you may have none. Still the same, the best thing to do may be to send this seller your injured-wheel picture and ask if they can get the clockwise version of the correct sized wheel. (better "exact" than "almost"...)
Good Luck!
[ November 17, 2012, 06:44 AM: Message edited by: Steve Klare ]
-------------------- All I ask is a wide screen and a projector to light her by...
Posts: 421
From: Hillside, NJ USA
Registered: Jan 2004
posted November 20, 2012 06:03 PM
Steve always pulls through. He bought a couple of things from me in addition to some projector advice at the last CinSea. I then began singing "KLARE, the moment I met you I swear..something happened to me.." oh wait. That was "CLAIR" by Gilbert O'Sullivan. My bad..
-------------------- "the image is about 30 feet ahead of us."
Posts: 4554
From: New York, NY, USA
Registered: Jun 2003
posted November 21, 2012 03:02 PM
Very interesting that a singer whose first hit starts off with a promise to commit suicide follows up with a sweet song about babysitting....
Doug
[ November 21, 2012, 05:12 PM: Message edited by: Douglas Meltzer ]
-------------------- I think there's room for just one more film.....