8mm Forum: New / Old Stock Goko Cleaning Unit Felts FS

»	8mm Forum » 8mm equipment for sale/trade » New / Old Stock Goko Cleaning Unit Felts FS

UBBFriend: Email this page to someone!

Author

Topic: New / Old Stock Goko Cleaning Unit Felts FS

Kevin Clark
Jedi Master Film Handler

Posts: 978
From: Bapchild, Kent, UK
Registered: May 2004

posted September 22, 2015 05:42 AM

These are quite hard to find now - original unused (new / old stock) cleaning felts for use with Goko and similar film cleaning units.

I have a total of 16 felts as shown - started out as a box of 20 but 4 have been used:

Each cleaning unit uses two so I am selling these at £3 per pair or £20 for the box of all 8 pairs. Postage is extra, payment by PayPal only and I will post Worldwide.

Kevin

| IP: Logged

Paul Browning
Phenomenal Film Handler

Posts: 1006
From: West Midlands United Kingdom
Registered: Aug 2011

posted September 22, 2015 06:44 AM

Hi kevin, i'll take them off you, put on hold, all of them thanks.

| IP: Logged

Andrew Woodcock
Film God

Posts: 7477
From: Manchester Uk
Registered: Aug 2012

posted September 22, 2015 10:15 AM

Let me know Kevin please when you are about to list the Goko spares you spoken about selling.

--------------------
"C'mon Baggy..Get with the beat"

| IP: Logged

Kevin Clark
Jedi Master Film Handler

Posts: 978
From: Bapchild, Kent, UK
Registered: May 2004

posted September 25, 2015 12:54 AM

Hello Paul - thank you again - the Eumig lens & film cleaning felts will arrive today - please check your PM for more info.

Hello Andrew - I've organised my Goko spare parts so will now set them up as kits for the respective models - I don't have drive belts though but no problem there as they can be purchased from Edwin. Sorry this has taken so long as my hobby time is tight but you will hear from me very soon.

Kevin

| IP: Logged

Andrew Woodcock
Film God

Posts: 7477
From: Manchester Uk
Registered: Aug 2012

posted September 25, 2015 04:18 AM

Thanks Kevin.
Drive belts and lamps don't concern me Kevin because as you quite correctly point out, you can still get hold of these items easy enough.

It's things like motors and magnetic heads, spare boards etc etc that I'm looking to obtain.
Oh and a spare dust cover if you happen to have one of those?
The RM 8008 is so far the only model I own Kevin.

[ September 25, 2015, 06:10 AM: Message edited by: Andrew Woodcock ]

--------------------
"C'mon Baggy..Get with the beat"

| IP: Logged

Kevin Clark
Jedi Master Film Handler

Posts: 978
From: Bapchild, Kent, UK
Registered: May 2004

posted September 27, 2015 03:36 AM

Hello Andrew

I promise I am getting there regarding organising the Goko spares - four big boxes full takes a while to go through and identify / bag up but will be worth the wait.

I always thought you had the absolute top of the range Goko model - the RM8008-WITM ?

Kevin

| IP: Logged

Andrew Woodcock
Film God

Posts: 7477
From: Manchester Uk
Registered: Aug 2012

posted September 27, 2015 06:37 AM

Sorry Kevin, I might be being a bit dumb here, but I really don't understand your last question there sorry??

--------------------
"C'mon Baggy..Get with the beat"

| IP: Logged

Kevin Clark
Jedi Master Film Handler

Posts: 978
From: Bapchild, Kent, UK
Registered: May 2004

posted September 27, 2015 07:34 AM

Hello Andrew

I was pulling your leg - the RM8008 is Goko's top of the range stereo super 8 editor - I was implying there was an even better model hoping you would ask me for more details.

My 'joke' was in the model number: Goko RM8008 WITM

With
Inbuilt
Teas
Maid

Kevin

| IP: Logged

Andrew Woodcock
Film God

Posts: 7477
From: Manchester Uk
Registered: Aug 2012

posted September 27, 2015 09:15 AM

Liking it Kevin!
Have you got a spare one?
I could do with a decent Maid around here..tea or any other variety! [Smile]

[ September 27, 2015, 10:59 AM: Message edited by: Andrew Woodcock ]

--------------------
"C'mon Baggy..Get with the beat"

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2