8mm Forum: Xenon Pedestal on Ebay

»	8mm Forum » 16mm Forum » Xenon Pedestal on Ebay

UBBFriend: Email this page to someone!

Author

Topic: Xenon Pedestal on Ebay

Michael O'Regan
Film God

Posts: 3085
From: Essex, UK
Registered: Oct 2007

posted January 27, 2009 02:21 PM

I wish I had the room......
http://cgi.ebay.co.uk/Eiki-16mm-model-EX5000-Xenon-Arc-film-projector_W0QQitemZ170297894879QQcmdZViewItemQQptZUK_Photography_VintagePhotography_VintagePhotoAccessories?hash=item170 297894879&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A10%7C39%3A1%7C240%3A1318

-Mike

| IP: Logged

David Erskine
Expert Film Handler

Posts: 230
From: Letchworth Garden City, Herts
Registered: Aug 2008

posted January 27, 2009 05:47 PM

And I thought that was you - in with the 99p bid!! It is rather nice, though. I worked out I could fit it in - but I'd have to get rid of the 8 & 35mm (all 3 units slide back and forth horizontally - I worked out a carousel but found Icouldn't get my tum past it!)

--------------------
I've NEVER let failure go to MY head!

| IP: Logged

Michael O'Regan
Film God

Posts: 3085
From: Essex, UK
Registered: Oct 2007

posted January 28, 2009 01:33 AM

If anybody even has the room to store it for possible future use it would be a bargain at 99p - but, I wonder how much it'll go for.
-Mike

| IP: Logged

John Whittle
Jedi Master Film Handler

Posts: 791
From: Northridge, CA USA
Registered: Jun 2003

posted January 30, 2009 01:21 PM

FYI, this is a really early model somewhere around 1970-73. The sprocket layout is very similar to the MS-860 President series. But there are problems with the take-up, wow and flutter, and as I recally a tube amp with output tubes that were discontinued in 1975.

So plan an a little bit of re-work, new amp and ideally a torque motor for take-up like Eiki used on the Ex-6000 machine.

John

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2