8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » Rank Aldis problem

 - UBBFriend: Email this page to someone!    
Author Topic: Rank Aldis problem
John Yapp
Expert Film Handler

Posts: 148
From: Telford England.
Registered: Dec 2011


 - posted May 06, 2013 11:25 AM      Profile for John Yapp   Email John Yapp   Send New Private Message       Edit/Delete Post 
I recently acquired my first 16mm machine, a Rank Aldis automatic. The problem I have with it is that although rewinding reel to reel works fine, if I turn the control knob to reverse, the film runs backwards but the feed spool doesn't take up the film.Anyone have any experience of this?

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted May 07, 2013 02:35 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
This is an unusual problem, but it is possible that the coupling lever for rapid rewinding is somehow stuck in the rewind position (pull towards you), this is supposed to return to its original position when the main control knob is returned to "O".

--------------------
Maurice

 |  IP: Logged

John Yapp
Expert Film Handler

Posts: 148
From: Telford England.
Registered: Dec 2011


 - posted May 07, 2013 03:11 AM      Profile for John Yapp   Email John Yapp   Send New Private Message       Edit/Delete Post 
Thanks Maurice, I've checked that, and the lever is free to move backwards and forwards. If I move it forwards manually without film,it of course enters rewind mode, but when choosing reverse, nothing seems to move into position to change the direction of the feed spool.

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted May 07, 2013 10:53 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
John, I regret that I am not an engineer so have no idea what goes on inside! However, you could do no harm in taking the back off and see what moves and what doesn't.

Put in the mains plug (be very careful), and check what goes on.

You may know that Rank did not make this projector, it is a badged German Bauer, probably the P6. Rank name for GB, Philips for Holland, Siemens for Austria, and even the later models had the name Bosch on there somewhere.

Perhaps some of our Continental friends may be able to give advice.

--------------------
Maurice

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2