8mm Forum: Even more st1200hd problems

»	8mm Forum » 8mm Forum » Even more st1200hd problems

UBBFriend: Email this page to someone!

Author

Topic: Even more st1200hd problems

Chip Gelmini
Phenomenal Film Handler

Posts: 1733
From: Brooksville, FL
Registered: Jun 2003

posted September 30, 2004 11:36 PM

Oh well. It worked for one month.

Turned it on and ran a show tonight, no problems.

It was off for about 1 hour, turned it back on again. The leader jammed at the bottom sprocket. Went to back it up, and heard a loud grinding noise. Took the back cover off, and found the main drive belt jumped off the pullies. Attempt to put it back on, and an idler pulley off the 18/24 switch in the way. Took that off carefully to reposition the belt OK. Installed everything and it looked OK. Turned it back on, and now in the still mode the motor runs and the heat shield does not go up giving full brightness.

Oh well. Another goddamn Ebay parts machine.

Did this happen to anyone else?

| IP: Logged

Tom Photiou
Film God

Posts: 4837
From: Plymouth U.K
Registered: Dec 2003

posted October 01, 2004 02:13 PM

Chip, not too sure if i can help but would the clutch assembly exploded view help if i can e mail it to your,(or air mail). [Wink]

| IP: Logged

Chip Gelmini
Phenomenal Film Handler

Posts: 1733
From: Brooksville, FL
Registered: Jun 2003

posted October 01, 2004 11:36 PM

Thanks that would be great. Email is prfcg@cape.com

Please attach as a file to the mail. :-)

| IP: Logged

Tom Photiou
Film God

Posts: 4837
From: Plymouth U.K
Registered: Dec 2003

posted October 03, 2004 06:21 AM

Your e mail is on the way, let me know if you dont recieve it please. [Wink]

| IP: Logged

Barry Johnson
Master Film Handler

Posts: 358
From: United Kingdom
Registered: Jul 2003

posted October 04, 2004 05:00 AM

Still frame devices? Remove them.Cannot understand why anyone would want to see a still frame from a film.If they are home movies then you may just have a point but taking a proper photograph would be better.Cine film records movement.They are a confounded nuisance when they go go wrong.Personally I do not need them and have removed them from two of my projectors.

--------------------
Standard8 rules!!

| IP: Logged

Chip Gelmini
Phenomenal Film Handler

Posts: 1733
From: Brooksville, FL
Registered: Jun 2003

posted October 04, 2004 08:35 AM

My projector in question really does need a tech for this repair. Hopefully nothing is gone and the parts are fine just need to be reinstalled and calibrated. I gather this after looking at the email I got from Tom.

Can anyone recommend a good repair center, quick service and fair prices? Name phone email contact?

Thank you.

Chip

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2