8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » GS 1200 question - reels won't fit

 - UBBFriend: Email this page to someone!    
Author Topic: GS 1200 question - reels won't fit
Gary Huggins
Film Handler

Posts: 40
From: Kansas City, MO, USA
Registered: Sep 2013


 - posted March 10, 2014 10:34 PM      Profile for Gary Huggins   Email Gary Huggins   Send New Private Message       Edit/Delete Post 
I was looking at a GS 1200 today, and i seemed to be in great condition except for one strange detail - the spindles were too thick for the reels.

Neither the reel of the Super-8 test film I had nor the take-up reel I supplied would fit onto the spindle, not all the way - you really had to jam it on to get it to go even halfway.

Has anyone encountered this before?

 |  IP: Logged

Winbert Hutahaean
Film God

Posts: 5468
From: Nouméa, New Caledonia
Registered: Jun 2003


 - posted March 10, 2014 10:42 PM      Profile for Winbert Hutahaean     Send New Private Message       Edit/Delete Post 
This has to be in regular 8mm forum not "for sale" room. Doug, can you move?

BTW, really strange your situation is. Can you show us a picture.

Perhaps someone has converted the arm to the "Extend-A-Reel" size?

This was previously discussed here:

http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007378

There are two kind of super 8mm reels:

 -

The one with grey color has bigger slot, but this is very rare. Your projector might have been converted to that size.

--------------------
Winbert

 |  IP: Logged

Gary Huggins
Film Handler

Posts: 40
From: Kansas City, MO, USA
Registered: Sep 2013


 - posted March 11, 2014 02:59 AM      Profile for Gary Huggins   Email Gary Huggins   Send New Private Message       Edit/Delete Post 
It has definitely been modified to fit the reel on the left. There was a housing around the spindle that had been soldered on.

Yet every other thread about Extend-A-Reel mentions the square 16mm core, and in the photo above it's round.

But if it's been modified for Extend-a-Reel, why would both arms of the projector have the same thicker spindle? The big-slot reels were used as take-up reels only the separate Extend-A-Reel unit, correct?

Is it possible this projector was home-modified so it could project and take-up films that were already on PRC reels?

 |  IP: Logged

Joe Taffis
Phenomenal Film Handler

Posts: 1592
From: United States
Registered: Jun 2003


 - posted March 11, 2014 09:53 PM      Profile for Joe Taffis   Email Joe Taffis   Send New Private Message       Edit/Delete Post 
The blue reel on the left in the photo above is a super 8mm reel....

--------------------
Joe Taffis

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2