8mm Forum: YELCO DS 810 MT instruction manual + Framer issue

»	8mm Forum » 8mm Forum » YELCO DS 810 MT instruction manual + Framer issue

UBBFriend: Email this page to someone!

Author

Topic: YELCO DS 810 MT instruction manual + Framer issue

Mark L Barton
Jedi Master Film Handler

Posts: 621
From: Bristol, South Glos, England
Registered: Mar 2009

posted March 14, 2014 10:18 AM

Hello I have two Yelco DS 810 MT projectors and they are pretty good machines. I am looking for a copy of the owners operating instructions, not that I cannot operate them (its easy) but that both projectors have what appears to be frozen framer knobs, ie they cannot be turned to adjust the frame (so far none of my films need re framing but what if.....)
Any help greatly appreciated.
Thank you

| IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007

posted March 14, 2014 10:58 AM

Mark

The instruction book will not help you with your problem.

I have a Yelco DS-800M and a DS-607M and the Instruction Book for each says exactly the same under framing:-

"In case the black demarcation line between the frames appears on the screen, turn the framing knob in either direction to make proper adjustment."

It is strange that both your projectors have the same problem, they may just need a spot of lubrication.

--------------------
Maurice

| IP: Logged

Mark L Barton
Jedi Master Film Handler

Posts: 621
From: Bristol, South Glos, England
Registered: Mar 2009

posted March 16, 2014 02:55 PM

Thank you Maurice. Both projectors were bought at different times, l serviced them yet both have the same issue, yes the mechanics of both framers have been carefully lubed yet they are literally frozen, very strange.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2