8mm Forum: A question for fumeo 9119 owners

»	8mm Forum » 8mm Forum » A question for fumeo 9119 owners

UBBFriend: Email this page to someone!

Author

Topic: A question for fumeo 9119 owners

Jose Artiles
Master Film Handler

Posts: 357
From: Spain
Registered: Oct 2005

posted April 14, 2015 07:00 PM

Can someone tell me how i can open the back of my fumeo 9119 please? I need to change the belt and its really difficult to know the way to open it.

Thanks a lot

--------------------
As Steven Spielberg says....
Nothing beats old school projection. Digital is just an imitation.

| IP: Logged

Paul Browning
Phenomenal Film Handler

Posts: 1006
From: West Midlands United Kingdom
Registered: Aug 2011

posted April 15, 2015 02:35 PM

Hi Jose, There are four allen screws, one in each corner of the machine as you look at it, they are 4mm I think, and counter sunk, so are just below the surface, also you will need to remove the inching knob at the back of the machine, this just pulls off, but has pin location. This should get you in the back to change your belts. If your stuck just ask.

| IP: Logged

Jose Artiles
Master Film Handler

Posts: 357
From: Spain
Registered: Oct 2005

posted April 15, 2015 07:45 PM

Thanks a lot for all the information Mr. Browning , i will try to open the projector again following your instructions. [Smile]

--------------------
As Steven Spielberg says....
Nothing beats old school projection. Digital is just an imitation.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2