John Omelvena
Junior Posts: 1
From: Lumsden, Southland, New Zealand
Registered: Sep 2015
posted September 17, 2015 08:51 PM
Hello
I'm new to the forum and to film projectors and was wondering if there were any websites that might have information on repairing and maintaining a Eumig Mark 610D projector. I picked a cheap one recently and it has a few problems including the feeder reel constantly spinning and the take up reel turning slowly. I'm going to hunt around the forums for tips but I would love some proper information on fixing this old girl up.
Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003
posted September 17, 2015 09:13 PM
Hi John,
This Forum is about as good as it gets where repairing projectors is concerned. Quite often if you throw out a question here a bunch will converge around it and compare notes.
The nice thing is most of the time one of these machines fail it's not the first time in the history of film: if you get enough collectors together there's a decent chance somebody else has already been there.
-------------------- All I ask is a wide screen and a projector to light her by...