8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Need Fixng Elmo 912/S Sound Editor

- UBBFriend: Email this page to someone!    
Author Topic: Need Fixng Elmo 912/S Sound Editor
Steve Meyer
Film Handler

Posts: 59
From: USA
Registered: Jan 2016

- posted May 07, 2016 09:36 PM      Profile for Steve Meyer   Email Steve Meyer   Send New Private Message       Edit/Delete Post 
I just picked up an Elmo 912/S Sound Editor. It seems I need to have the prism fixed to turn at the same time as the sprocket wheel inside the unit. I don't see anyway to get to it. I greatly appreciate any help. It is a great unit other then that issue. All other functions work perfectly.

Thanks
Steve M.

 |  IP: Logged
Graham Ritchie
Film God

Posts: 4001
From: New Zealand
Registered: Feb 2006

- posted May 07, 2016 11:09 PM      Profile for Graham Ritchie   Email Graham Ritchie   Send New Private Message       Edit/Delete Post 
Steve first try to turn the sprocket with your finger and with the other hand push and hold that little knob thing "that's sticking out" at the end of that sprocket shaft, while turning the sprocket itself. With a bit trial and error you should be able to get both back in sync...well hopefully [Smile]

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2