Posts: 1061
From: Burnsville, MN, USA
Registered: Dec 2009
posted May 31, 2016 11:51 AM
Many projectors have the option of setting different voltages so you can match them to the voltage of the mains that you are using. Typically the options are 100/110/117/125. If my mains is reading 121, is it best to set the projector at a higher or lower voltage i.e. 117 or 125? Thanks in advance.
Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003
posted May 31, 2016 11:59 AM
I'd go to 125. You lose hours on a lamp kind of dramatically as you raise the operating voltage higher than the rating.
If you discovered a thousand free lamps in an abandoned camera store and you just want it bright, go low! (Hope there were some sockets: you'll be needing them too!)
-------------------- All I ask is a wide screen and a projector to light her by...