Posts: 2211
From: New York City, NY, USA
Registered: Jun 2003
posted August 12, 2017 05:06 PM
Hello. Anyone who has a Yelco or Fujicascope Projector with optical ability-how do you change the optical lamp? I can't even find it!
Posts: 7477
From: Manchester Uk
Registered: Aug 2012
posted August 12, 2017 06:54 PM
Its mounted horizontally instead of vertically and uses a different lamp instead G29 vs G27 to the Elmo (filament mounted horizontally) but otherwise, the way the bayonet fits to its base connector is the same. Turn acw to release.
You should find it near the mag heads with just the top end of the lamp on display when the front cover is removed.
-------------------- "C'mon Baggy..Get with the beat"
Posts: 7477
From: Manchester Uk
Registered: Aug 2012
posted August 13, 2017 02:51 AM
If you took a photo of the area close to the magnetic head region on your projector, magnified, hopefully I could then add an arrow to your photo to show you where I'd expect it to be in the machine.
What model is it Alan?
The advice previously given was based on the layout of the Fujicascope SH 30.
-------------------- "C'mon Baggy..Get with the beat"