8mm Forum: 2, 3 shutterblade

»	8mm Forum » 8mm Forum » 2, 3 shutterblade

UBBFriend: Email this page to someone!

Author

Topic: 2, 3 shutterblade

Matthieu van der Sluis
Master Film Handler

Posts: 373
From: Barendrecht, The Netherlands
Registered: Aug 2017

posted November 03, 2017 02:54 AM

Do you have to line the 2, 3 shutter out, everytime you swiitch?
http://www.ffr-film.de/

| IP: Logged

Dominique De Bast
Film God

Posts: 4486
From: Brussels, Belgium
Registered: Jun 2013

posted November 05, 2017 06:12 PM

For the Elmo ST 180, FFR replaces the screws by others that can be turned by hands so it takes very few time to switch from two to three blades and vice versa.

--------------------
Dominique

| IP: Logged

Matthieu van der Sluis
Master Film Handler

Posts: 373
From: Barendrecht, The Netherlands
Registered: Aug 2017

posted November 06, 2017 02:01 PM

I was thinking of putting this in my GS1200

| IP: Logged

Dominique De Bast
Film God

Posts: 4486
From: Brussels, Belgium
Registered: Jun 2013

posted November 09, 2017 12:38 AM

I don't know if it's the same system with the GS 1200.

--------------------
Dominique

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2