8mm Forum: GS1200 Speed Board needed

»	8mm Forum » 8mm equipment for sale/trade » GS1200 Speed Board needed

UBBFriend: Email this page to someone!

Author

Topic: GS1200 Speed Board needed

Alan Rik
Film God

Posts: 2211
From: New York City, NY, USA
Registered: Jun 2003

posted January 20, 2014 03:23 PM

Hello All-
I'm hoping someone out there has a speed board for the GS1200 that I can have/purchase.
I need the one in the photo below:

Thanks!

| IP: Logged

Maurizio Di Cintio
Jedi Master Film Handler

Posts: 977
From: Ortona, Italy
Registered: Jan 2004

posted January 20, 2014 05:05 PM

Check out this (click here )

Scroll down up to about the middle of the page and there it is. Not cheap but at least you can have it...

--------------------
Maurizio

| IP: Logged

Alan Rik
Film God

Posts: 2211
From: New York City, NY, USA
Registered: Jun 2003

posted January 20, 2014 06:04 PM

Looks good! Anyone here locally before I have to order overseas?

| IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003

posted January 20, 2014 07:08 PM

Hey Alan,

Are you handy with a soldering iron?

Here's the motor control IC:

BA3601 on E-bay

This is the vast majority of what could be wrong on that board...

--------------------
All I ask is a wide screen and a projector to light her by...

| IP: Logged

Alan Rik
Film God

Posts: 2211
From: New York City, NY, USA
Registered: Jun 2003

posted January 20, 2014 07:36 PM

I asked a GS specialist and they told me that if the fine speed adjustment works most likely its not the IC but some other component on the board. But...Leon has them brand new sealed so I'm going to buy one and then take this one apart and see if I can fix it. Then I can have a spare!

| IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003

posted January 20, 2014 07:49 PM

I'm seeing about 5 transistors on the board too. If it isn't the IC these would be my next guess. After that the electrolytic capacitors.

Resistors and ceramic capacitors?: no!

Of course there's always the classic thing of the soldering needing refreshing.

--------------------
All I ask is a wide screen and a projector to light her by...

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2