Author
|
Topic: EJL vs. ELC for older Elf/Eiki 16mm projectors
|
Bart Smith
Expert Film Handler
Posts: 228
From: Hackney, London
Registered: Feb 2007
|
posted February 05, 2009 12:47 AM
This question had been done to death with regards to using 250w ELCs in the GS1200, the vast majority of informed opinion being that it is a bad idea due to potential damage to the transformer.
My question relates to the older Elf machines that were designed originally to use the 200w EJL, and whether or not using an ELC is advisable. I was trawling through the archives of the forum looking for an answer, and came across a post by John Whittle saying that the only substantive design change to the Elfs when they moved on to the 250w lamps was an upgraded ceramic lamp base. Further posts by him and David Panell in the same thread mention the transformer design as being an auto-transformer, and that they are not susceptible to the same sort of damage that might occur to (for instance) a GS1200. The implication as I understand it was that there would be no problems with the higher wattage lamps in these machine.
So, can anyone give a definitive answer? Is it fine to put a 250w lamp in an older Elf machine marked as taking a 200w lamp? Is there any need to upgrade the ceramic base?
***EDIT*** Another thought occurs to me, if there is no problem using a 250w lamp, what would the theoretical limit be, assuming that there were any available with the correct fitting/capsule position etc. ***EDIT***
Bart [ February 05, 2009, 02:48 AM: Message edited by: Bart Smith ]
-------------------- www.bluecinetech.co.uk
| IP: Logged
|
|
|
|