Lars Pettersson
Master Film Handler
Posts: 282
From: Stockholm, Sweden
Registered: Jan 2007
|
posted March 17, 2009 03:41 PM
Hello,
I have a question regarding the Bauer P6 Studio projector. I have this machine, but the vertical image steadiness has always felt a bit shaky to me. I increased the film pressure in the gate by means of the two screws on the lens holder, and image stability improved a lot, but there´s still a slight rhythmical unsteadiness, so I´m thinking the friction in the film feed arm may be too high. Perhaps the feed friction has to be high on the P6 studio, since it´s a doubleband machine?
Also, since the lamp house has condensers in it, the P6 gives a really bright picture, about 50% brighter than the Bauer P8 I compared it to. I´m thinking this perhaps also means increased heat in the gate, and perhaps the springs in the film pressure plate grow weaker because of this?
Should I change the film pressure plate? How can I decrease the friction in the film feed arm? ![[Roll Eyes]](rolleyes.gif)
Cheers
Lars
| IP: Logged
|
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
