8mm Forum: Kodak 8K5 or 7K2 reel arm

»	8mm Forum » 16mm Forum » Kodak 8K5 or 7K2 reel arm

UBBFriend: Email this page to someone!

Author

Topic: Kodak 8K5 or 7K2 reel arm

Barry Fritz
Phenomenal Film Handler

Posts: 1061
From: Burnsville, MN, USA
Registered: Dec 2009

posted February 07, 2011 08:36 PM

Just received an 8K5 via UPS. Upon opening, I noted the cover/door/speaker was ajar and the takeup reel arm was broken. If anyone has a parts machine that would like to sell me a reel arm, please contact me. Thanks. Here's a pic.

| IP: Logged

Pasquale DAlessio
Film God

Posts: 3523
From: Bristol,RI, USA
Registered: May 2010

posted February 11, 2011 08:44 AM

Barry

If you can't find one, what about using Auto Weld that is used for automotive repairs?

It's a shame that happens. I hope it was packed right. What does it take to get something from point A to point B without breakage?

Good luck!

Pat DAlessio

| IP: Logged

Barry Fritz
Phenomenal Film Handler

Posts: 1061
From: Burnsville, MN, USA
Registered: Dec 2009

posted February 11, 2011 11:38 AM

Pat: I had it heli-arc welded and found a textured paint that matches almost perfectly. Only problem is that the reel arm does not fold up like it should. It touches in the middle of the film advance knob. There must have been a bit of error in the welding, making the shape of the arm slightly off. So,, still looking for a replacement. The projector and amp work perfectly. It's a pretty nice unit. This is the first major damage I have had, and have received over 80 projectors in the mail. Sent pics to shipper and UPS covered it. Already have a credit on charge card for it.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2