8mm Forum: Fumeo 24v - 200w or 250w ?

»	8mm Forum » 16mm Forum » Fumeo 24v - 200w or 250w ?

UBBFriend: Email this page to someone!

Author

Topic: Fumeo 24v - 200w or 250w ?

William Stolen
Film Handler

Posts: 89
From: Belgium
Registered: Dec 2003

posted September 12, 2011 01:36 PM

Hi there,

I have a Fumeo 9250HD projector...
There's a lamp in it of 24V 200W (EJL)
May it replace it with an ELC 24V 250W?
Or does this harm the projector in any way?
Any help is appreciated.
Thanks.

Kind regards,
William.

| IP: Logged

Flavio Stabile
Jedi Master Film Handler

Posts: 707
From: Roma, Italia
Registered: Feb 2005

posted September 15, 2011 06:45 AM

Hi William,

you should not use 250 watt lamp on a projector if it use 200 watt, even if the voltage is the same.

Fumeo produced specific models that can use 250 watt lamps, so my suggestion is to use only 200 watt ones, even if more expensive.

bye
Flavio

| IP: Logged

William Stolen
Film Handler

Posts: 89
From: Belgium
Registered: Dec 2003

posted September 16, 2011 04:20 PM

Thanks for your answer Flavio!

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2