8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » NT1 through an amp????

- UBBFriend: Email this page to someone!    
Author Topic: NT1 through an amp????
Tom Photiou
Film God

Posts: 4837
From: Plymouth U.K
Registered: Dec 2003

- posted July 25, 2017 03:30 PM      Profile for Tom Photiou     Send New Private Message       Edit/Delete Post 
sorry to the 16mm vets on here, i think i enquired on this before but cant find the original post,
Am i able top put the NT1 via a simple pioneer stereo amp . As you know the only output is for the phono plug external speaker. [Embarrassed]

 |  IP: Logged
Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007

- posted July 28, 2017 03:26 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Tom

I am not too sure about the NT1, but many Eiki/Elf models have an Auxiliary Output via the jack socket which is used for the external speaker connection.

However, a three ring (stereo) jack plug is required. Connections are to:-

The long sleeve section.
The small middle ring.

Ignore the small end tip.

Best of luck!

--------------------
Maurice

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2