8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » General Yak   » Anyone seen THE HATEFUL EIGHT projectedf via 2K?

 - UBBFriend: Email this page to someone!    
Author Topic: Anyone seen THE HATEFUL EIGHT projectedf via 2K?
Adrian Winchester
Film God

Posts: 2941
From: Croydon, London, UK
Registered: Aug 2004


 - posted January 22, 2016 09:11 AM      Profile for Adrian Winchester     Send New Private Message       Edit/Delete Post 
I ask - specifically in relation to 2K digital projection - because the chief projectionist at a community cinema I'm involved in is concerned that technical factors including the digital release being 4K and the 2:76:1 aspect ratio will result in picture quality that's worse than DVD, so I'd appreciate the thoughts of anyone who has ACTUALLY SEEN IT projected via a 2K. I thought roughly about half of cinema screens have 2K projection so that's going to be a lot of unhappy customers if the image is that bad, even if plenty don't notice! We would have liked to have the option of 35mm but for some reason there's no 35mm prints here despite 35mm availability in the USA. So if you're in a position to see it on 70mm and have not yet done so, this might add to the incentives!

--------------------
Adrian Winchester

 |  IP: Logged

Patrick Walsh
Jedi Master Film Handler

Posts: 723
From: Christchurch, New Zealand
Registered: Jul 2006


 - posted January 22, 2016 01:52 PM      Profile for Patrick Walsh   Email Patrick Walsh   Send New Private Message       Edit/Delete Post 
I'm screening it on my 2k projector at my cinema, the DCPs where sent out as 4k, the image looks fine, There is quiet a number of films that are sent out as 4k DCPs and they all run fine on 2K projectors, it has been formatted to get the full width of the 70mm image on the screen so it has black bars top and bottom.

--------------------
"Raise The Titanic!", It would of been cheaper to lower the Atlantic!

 |  IP: Logged

Adrian Winchester
Film God

Posts: 2941
From: Croydon, London, UK
Registered: Aug 2004


 - posted January 22, 2016 02:18 PM      Profile for Adrian Winchester     Send New Private Message       Edit/Delete Post 
Patrick - many thanks for your reply, that's extremely helpful. Would you say that even a quite fussy viewer wouldn't think the picture quality looks at all inferior to other current releases?

--------------------
Adrian Winchester

 |  IP: Logged

Patrick Walsh
Jedi Master Film Handler

Posts: 723
From: Christchurch, New Zealand
Registered: Jul 2006


 - posted January 23, 2016 02:15 AM      Profile for Patrick Walsh   Email Patrick Walsh   Send New Private Message       Edit/Delete Post 
it just looks like any other film in terms of brightness etc, one thing I notice is films that where shot on film look sharper than films shot on video, H8 being a 65mm neg (I think) looks very sharp.

--------------------
"Raise The Titanic!", It would of been cheaper to lower the Atlantic!

 |  IP: Logged

Adrian Winchester
Film God

Posts: 2941
From: Croydon, London, UK
Registered: Aug 2004


 - posted January 23, 2016 09:01 AM      Profile for Adrian Winchester     Send New Private Message       Edit/Delete Post 
Thanks again, that's very reassuring. I get the impression that the number of films being shot on film is perhaps rising, so hopefully there will be no shortage of them to compare with digital ones. If you screen 'Carol' I expect it will have the softer look with conspicuous grain that we found, but that was shot on Super 16. I think some of the critics are applauding the look that Super 16 gives it, even if they don't know that this is the shooting format!

--------------------
Adrian Winchester

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2