This is topic Rewind arms required in forum 9.5mm for sale/trade/wanted at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=10;t=000004
Posted by Craig Hamilton (Member # 258) on February 19, 2007, 05:21 AM:
Does anyone have any 9.5mm rewind arms for sale. No stupid prices please, If not then its off to the BFCC in May, should get a pair there as all sorts turn up on the bring & buy stall.
Craig
Posted by Kevin Faulkner (Member # 6) on February 19, 2007, 05:41 AM:
Would it not be possible to use 16mm rewinds and maybe get the spindles machined down?
Kev.
Posted by Lee Mannering (Member # 728) on February 19, 2007, 05:59 AM:
Hello Craig. I did sell a very nice set of 9.5 rewinders at farnworth. Dont help now I know, but I will keep an eye open for you. The ones I had were tri gauge 9.5, 16 & 8. £25.00.
You should not have to pay more than £20 ish.
Kindest regards
Posted by Craig Hamilton (Member # 258) on February 19, 2007, 06:50 AM:
Kev, you can machine down 16mm spindles, but you will also have to fabricate a backing plate with a locating nipple to engage reel drive. If all else fails then this is an option.
Lee, thanks for the info.
Craig
Posted by Kevin Faulkner (Member # 6) on February 19, 2007, 07:24 AM:
Just wondered. I have not studied 9.5mm reels too closely to know what the differences are.
Kev.
Posted by Craig Hamilton (Member # 258) on February 20, 2007, 06:30 PM:
Kev
Look at this ebay listing, it has some nice clear shots of a 9.5 reel.
Pathescope Reel
Craig
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2