This is topic Does this look suspicious. in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=000951

Posted by Alan Gouger (Member # 31) on December 15, 2004, 01:19 PM:
 
Ive been keeping an eye on ebay lately. A few GS1200 have sold cheaper then usual. I missed out.
I now see this one. Item number: 3859174883

Do you see those wires hanging out. He says he does not have a power cord to test the unit. I wish ebay offered some way of warning potential buyers.

Would you take the risk if you could get this under $600
 
Posted by Mike Peckham (Member # 16) on December 15, 2004, 01:36 PM:
 
Here's the link in case it makes it easier for others to check it out; http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3859174883

Those wires suggest the back panel has been taken off and put back on without much thought as they have been allowed to get trapped. Not a good sign.

If the seller can't give any assurance that it is working, even basically running you could be taking a big risk so only really worth paying what it would be worth as a parts machine.

Of course, it might be totally spanky and lovely you'll get a real gem. I guess you pays your money and takes your chances...

If I was looking, I would probably pay up to about £400 for a GS 1200 that is unseen and untested, but even then that's a big risk.

Sorry, not much help [Frown] .

Mike
 
Posted by Alan Gouger (Member # 31) on December 15, 2004, 04:27 PM:
 
Thanks Mike
I wanted to hear from someone else that they were seeing wires as well. Did not know if my eyes were playing tricks on me and it was a scratched photo or something.
Taking a risk on with him saying he cannot test the projector is scary enough but seeing those wires is a double red flag.
Im going to pass.

Its really strange how the timing on ebay must have something to do with a sale. For a while the GS1200s were selling sky high. Could not figure it out. Now they are going cheap again.

Thanks!
 
Posted by Jean-Marc Toussaint (Member # 270) on December 16, 2004, 12:40 AM:
 
Alan,
Those wires come from the speakers. Just as Mike said, someone obviously removed the back cover and didn't put it back correctly.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2