8mm Forum: New Elmo ST-1200 Rollers.

This is topic New Elmo ST-1200 Rollers. in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=002008

Posted by Rob Young. (Member # 131) on July 13, 2006, 07:18 AM:

Just wanted to say a big thank you to forum member Tom Photiou who has sent me a set of the new rubber rollers for the Elmo-ST1200, which he has had manufactured himself.

As many of you know, the original rollers are prone to breaking down as the rubber decays, potentially leaving these beautiful work-horse projectors useless.

The original set on my Elmo have already had the surface re-skimmed, so these newly manufactured rollers will most likely prove to be invaluable in the very near future.

Tom is asking an increadibly reasonable price for these parts and they look great to me; I believe he may still have some left and would strongly recommend that any self-respecting ST owner order a set while they can [Smile]

Posted by Tom Photiou (Member # 130) on July 13, 2006, 01:28 PM:

Many thanks Rob, if any one else has any feed back i am always very greatful, and while i'm about it, a very big thank you to all who have purchsed and also for those before who supported me with the full units a couple of years ago, i do still have a fair few pairs of the rubber wheels left.
All the feedback has been very well recieved,
[Wink]

Posted by Jan Bister (Member # 332) on July 13, 2006, 11:55 PM:

So how many pairs are still available? (I see you have yet to update your signature, Tom) [Wink]

UBB.classic^TM 6.3.1.2