This is topic GS1200 inlet shute replacement in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003820
Posted by Mark Todd (Member # 96) on July 01, 2008, 06:29 PM:
Hi all, I saw on steve osbournes last list/mag he is doing a new better inlet shute for the gs 1200( and st 180 160 600).
But I can`t find the mag etc, anyone try one yet, know what they are made from and from where and how much please.
Many thanks Mark.
Posted by Kevin Faulkner (Member # 6) on July 02, 2008, 04:18 AM:
The only source I know of for these is FFR in Germany. These are made of alloy and the latest ones are black anodised. I have tested one of these and I cant convince myself that they are any more hard wearing than the original later Elmo plastic ones.
I still think the best bet is to have the original modified like Wittners do or have the small white roller added.
Kev.
Posted by Mark Todd (Member # 96) on July 02, 2008, 08:10 AM:
Hi Kev, I wondered if they were those ones, shame they didn`t do one with a roller.
Best Mark
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2