8mm Forum: GS1200 inlet shute replacement

»	8mm Forum » 8mm Forum » GS1200 inlet shute replacement

UBBFriend: Email this page to someone!

Author

Topic: GS1200 inlet shute replacement

Mark Todd
Film God

Posts: 3846
From: UK
Registered: Aug 2003

posted July 01, 2008 06:29 PM

Hi all, I saw on steve osbournes last list/mag he is doing a new better inlet shute for the gs 1200( and st 180 160 600).
But I can`t find the mag etc, anyone try one yet, know what they are made from and from where and how much please.
Many thanks Mark.

| IP: Logged

Kevin Faulkner
Film God

Posts: 4071
From: Essex UK
Registered: Jun 2003

posted July 02, 2008 04:18 AM

The only source I know of for these is FFR in Germany. These are made of alloy and the latest ones are black anodised. I have tested one of these and I cant convince myself that they are any more hard wearing than the original later Elmo plastic ones.

I still think the best bet is to have the original modified like Wittners do or have the small white roller added.

Kev.

--------------------
GS1200 Xenon with Elmo 1.0...great combo along with a 16-CL Xenon for that super bright white light.

| IP: Logged

Mark Todd
Film God

Posts: 3846
From: UK
Registered: Aug 2003

posted July 02, 2008 08:10 AM

Hi Kev, I wondered if they were those ones, shame they didn`t do one with a roller.
Best Mark

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2