8mm Forum: Bauer T610 aux in

This is topic Bauer T610 aux in in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006787

Posted by Jeroen van Ooijen (Member # 1104) on January 14, 2012, 03:36 AM:

Can anybody tell me where is the aux in from the Bauer t610?
I don't have a manual.

Thanks

Posted by Maurizio Di Cintio (Member # 144) on January 14, 2012, 12:23 PM:

Hi, Jeroen.

You can either use the second or the third DIN socket (counted from the right hand side). If you want to use the second one (marked with a sort of "Q"), the relevant pins for input from the point of view of the observer, are: first pin (top left): left ch; the pin placed below this one is the right ch and the next one is the ground; respectively, they are pins No. 3, 5 and 2.

If planning to use the third DIN socket (marked with a sort of "< >", meaning input/output), you have to use the top right pin for the left ch, the pin placed below for the right ch, and the next one for the ground. Respectively they are pins No. 1, 4, 2.

Sorry, I don't have a scanner with me to visually give you these information, but I think the above should suffice. Good luck.

Posted by Jeroen van Ooijen (Member # 1104) on January 14, 2012, 07:20 PM:

It works fine,Mickeys Christmas carol almost finish!It's agreat machine and easy to do. [Big Grin]

UBB.classic^TM 6.3.1.2