This is topic RAISE THE TITANIC Sound Issue in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=007507
Posted by Chris Fries (Member # 2719) on October 06, 2012, 09:12 PM:
I recently picked up the Derann 600' "Raise the Titanic". A great digest with good color but has anyone noticed any sound problems with their copy? The sound on mine is very loud and gets a bit distorted at times.
Here is a clip. The sound level on the projector was set at 3.
http://www.youtube.com/watch?v=SDh1gn0Gxms
Posted by Rob Young. (Member # 131) on October 07, 2012, 03:35 AM:
Hi Chris,
My copy sounds great, so it sounds like a bad recording (I can't believe that of Derann ).
It is possible that the magnetic stripe is at fault making a good recording difficult.
This could happen on Derann release post-1991/92, when Derann started to apply their own magnetic stripe and would often resulted in this kind of classic "drop-out".
However (unless this was a later re-print) this was released on pre-stripe so that is unlikey, although not impossible (see if you can examine the stripe to make sure it looks good and uniform; not a definitive way of making sure, but at least if it did look bad then it would save you the hassle of attempting a re-record).
Most likely, I reckon, is a dodgy recording which a re-record would put right, if you can somehow arrange one
Posted by Graham Ritchie (Member # 559) on October 07, 2012, 03:56 AM:
Chris
Sorry I cant help with your sound, a re-record would be the way to go, but thanks all the same for posting that clip it looked really good.
Graham.
Posted by Rob Young. (Member # 131) on October 11, 2012, 01:17 PM:
Chris, any luck regarding re-recording your print.
Looking again, your print is the flat version?
Is it the 2 x 400ft version, or feature.
Print looks good; surely we can help on this forum with a new soundtrack? :
Graham; why would a re-record be the way to go, unless you know something we don't?
Posted by Patrick Walsh (Member # 637) on October 12, 2012, 01:45 AM:
my 600ft digest I used to have of RTT had this sound problem also, the full feature has fine sound
Posted by Chris Fries (Member # 2719) on October 12, 2012, 09:31 AM:
I am sorry to hear that you copy had the same sound, Patrick. Do you no longer have it? I wonder if Derann just had a bad run or do all the flat 600's have this sound? Has anyone else noticed this?
Rob, the stripe looks fine. I have not tried to do a re-record yet. I do have the film on VHS so I can make a new soundtrack. Unfortunately, the Chinon 1200 is the only sound projector I have that has variable speed and it is still not working. I might try the 6100 if I can find the time.
Posted by Patrick Walsh (Member # 637) on October 13, 2012, 03:42 AM:
No I no longer have the digest,I actually sold it so I could "raise" funds for the feature (excuse the pun!)
I believe it is a problem with maybe a batch of those digests, I know of others who have the RTT digest and the sound is fine.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2