8mm Forum: Eumig 905 projector inching knob problem maybe

This is topic Eumig 905 projector inching knob problem maybe in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=008693

Posted by Phil Mitchell (Member # 3876) on November 05, 2013, 12:30 AM:

Hi all,
As I understand it, if you lock the inching knob on the rear of unit which as manual says can be a reminder where to start recording a voice over etc, but once you engage the forward play knob it should unlock. On my old Emugig 905 this is not happening. I have compared things to my S912 and I cannot see any difference, the rubber belt behiind the frame speed knob is there, the bar that moves forwards or back works as it should. Is there something else I can look for. I can get it going but winding the inching knob manually, but that doesn't sound but motor sounds very sluggish. correct, any advice welcome

Phil

UBB.classic^TM 6.3.1.2