This is topic Eumig 810D regular 8 sprocket set in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:;f=1;t=009914

Posted by Alexander Beylin (Member # 4766) on April 17, 2015, 11:27 PM:
I bought Eumig 810D from the UK, it arrived without a regular 8 set of sprockets (only with a super 8 set installed). The regular 8 gate was there. Does anybody have a set of regular 8 sprockets for sale? Are these sprockets are compatible with the other eumig dual models?
Posted by Gary Crawford (Member # 67) on April 22, 2015, 07:00 AM:
Sorry it took so long to reply. I think I have a set of 810D sprockets for Standard 8. I can't look for them until after this weekend, since I'm going up to Jersey for the Cinesea film collectors meeting. I will check for you next week.
Posted by John Mark Sumner (Member # 4578) on May 11, 2015, 09:02 AM:
Dear Alexander,
I hope by now you have got fixed up with some standard 8 sprockets and gates. However, please action caution here. On the later 810D models (the ones with a mains switch on the left hand side narrow panel) the standard 8 sprockets are behind the super 8 ones which you have to remove to see the std 8 ones. Also, the front pressure plate is common and the standard 8 gate should be clipped into the removable lamp housing. I can supply the std 8 gate if that is missing and I can also supply original std 8 sprockets, gate and pressure plate if your 810D is one of the earlier models. E-mail me on or telephone 01253 778898 if you need further info or supply.

Visit for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation