This is topic Wolverine in forum 8mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011761

Posted by Jeffrey Miller (Member # 6092) on September 25, 2017, 06:50 PM:
 
Just got a Wolverine Movie Maker and generally like it very much (for the price). However, about half the time I am getting thin vertical blue streaks. These are not on the film, but show up on the scan and the LCD display. Any ideas? It usually happens after the machine has been running for a while.
 -
 
Posted by Andrew Woodcock (Member # 3260) on September 25, 2017, 06:54 PM:
 
This is a film forum jeffrey, digital conversion is merely an after thought that is somehow accepted here, but never on other equivalent forums.

You would not last 5 minutes pal elsewhere with chat like this! [Wink]
 
Posted by Ty Reynolds (Member # 5117) on September 25, 2017, 07:12 PM:
 
Great way to greet a new member, Andrew.
 
Posted by Andrew Woodcock (Member # 3260) on September 25, 2017, 07:20 PM:
 
It's all b@llocks mate.

First and foremost, and for all those years previously, this is a FILM forum.

More notably, it is an 8mm film forum as per it's title.

For Wolverine, either X Men or otherwise, search Wikipedia Digital Media, this will surely satisfy our digital hungry members far more than us ancient relics rambling on about an ancient media such as film ever could or would!!

We only have this place now, lets keep it pure and simple by it's own definition. [Wink]
 
Posted by Douglas Meltzer (Member # 28) on September 25, 2017, 07:34 PM:
 
No Andrew, that is a pretty crappy reply to a new member. Please avoid doing so again.

Doug
 
Posted by Andrew Woodcock (Member # 3260) on September 25, 2017, 07:34 PM:
 
ok
 
Posted by Douglas Meltzer (Member # 28) on September 25, 2017, 07:37 PM:
 
Thank you sir! Much appreciated.

Since Wolverine wouldn't exist without actual film, the topic is allowed here...

Jefferey, we have a fairly long existing thread concerning the system. I'll add your post to that thread.

Doug
 
Posted by Andrew Woodcock (Member # 3260) on September 25, 2017, 07:38 PM:
 
Of course! [Wink]
 
Posted by Douglas Meltzer (Member # 28) on September 25, 2017, 07:53 PM:
 
If someone has a solution to Jeffrey's streaking problem (sorry, couldn't resist) please answer his post here.

Doug
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2