This is topic Sankyo 600 in forum 8mm Forum at 8mm Forum.

To visit this topic, use this URL:;f=1;t=012978

Posted by Barry Webb (Member # 1897) on June 11, 2019, 03:27 AM:
Hi all im looking for a speed control board for a sankyo 600 projector its the one that sits to the right of the motor and has 7 wires plugged into it.
Or if anyone knows of someone that can rebuild it.
Cheers Barry
Posted by Janice Glesser (Member # 2758) on June 11, 2019, 09:19 AM:
Hi Barry... Take a look at this thread located in the technical tips section.;f=1;t=010987

What are the specific symptoms of the problem(s) you are experiencing with your machine?

I have done repair work on the speed board and replacing the micro switches on my Sankyo 600's. I now have 2 working machines. They are great sound projectors and well worth the effort to repair.
Posted by Lee Mannering (Member # 728) on June 12, 2019, 06:03 AM:
Barry keep an eye for dry solder joints in these. I had a brand new Sankyo 800 in the 80's fresh from the box and the speed control board had many dry joints. A run round with the iron corrected it. May not be your fault on the 600 tho.

Visit for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation