8mm Forum: Needed - Eumig-S 712D parts

This is topic Needed - Eumig-S 712D parts in forum 8mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=001805

Posted by Clinton Hunt (Member # 2072) on October 24, 2012, 09:03 PM:

Hi all, I recently got one of these projectors and (of course!) it is missing the super8 gate adapter and the sprocket-thingees for the standard8 this means it doesn't have a complete set of either. It seems a shame to pull it apart and use the rings,lamp etc for spares eh? Can anyone in this world that is getting smaller all the time help me?
Cheers New Zealand,
Clinton

Posted by Pasquale DAlessio (Member # 2052) on October 24, 2012, 09:27 PM:

There was a set on ebay not to long ago.

Posted by Hugh Thompson Scott (Member # 2922) on October 25, 2012, 05:09 AM:

Hello Clinton,I would advise trying Wittners or CHC as they might
have the relevant parts you require.

Posted by Clinton Hunt (Member # 2072) on October 25, 2012, 06:35 AM:

Hi Hugh,
I assume Wittners or CHC is in the U.K.? Can you give me a bit more information?
And I am also keeping a watch on Ebay for auctions there too.
Cheers

Posted by Hugh Thompson Scott (Member # 2922) on October 26, 2012, 03:23 PM:

Hi Clinton, Classic Home Cinema can be found in the films for
sale section, Wittners are in Germany and are at ;
www.wittner-cinetec.com, I'm sure that they should be able to help.Best of luck.

UBB.classic^TM 6.3.1.2