8mm Forum: Needed - Eumig-S 712D parts

»	8mm Forum » 8mm equipment for sale/trade » Needed - Eumig-S 712D parts

UBBFriend: Email this page to someone!

Author

Topic: Needed - Eumig-S 712D parts

Clinton Hunt
Jedi Master Film Handler

Posts: 845
From: Waharoa,North Island,New Zealand
Registered: May 2010

posted October 24, 2012 09:03 PM

Hi all, I recently got one of these projectors and (of course!) it is missing the super8 gate adapter and the sprocket-thingees for the standard8 this means it doesn't have a complete set of either. It seems a shame to pull it apart and use the rings,lamp etc for spares eh? Can anyone in this world that is getting smaller all the time help me?
Cheers New Zealand,
Clinton

--------------------
Cheers from me in New Zealand :-)

| IP: Logged

Pasquale DAlessio
Film God

Posts: 3523
From: Bristol,RI, USA
Registered: May 2010

posted October 24, 2012 09:27 PM

There was a set on ebay not to long ago.

| IP: Logged

Hugh Thompson Scott
Film God

Posts: 3063
From: Gt. Clifton,Cumbria,England
Registered: Jan 2012

posted October 25, 2012 05:09 AM

Hello Clinton,I would advise trying Wittners or CHC as they might
have the relevant parts you require.

| IP: Logged

Clinton Hunt
Jedi Master Film Handler

Posts: 845
From: Waharoa,North Island,New Zealand
Registered: May 2010

posted October 25, 2012 06:35 AM

Hi Hugh,
I assume Wittners or CHC is in the U.K.? Can you give me a bit more information?
And I am also keeping a watch on Ebay for auctions there too.
Cheers

--------------------
Cheers from me in New Zealand :-)

| IP: Logged

Hugh Thompson Scott
Film God

Posts: 3063
From: Gt. Clifton,Cumbria,England
Registered: Jan 2012

posted October 26, 2012 03:23 PM

Hi Clinton, Classic Home Cinema can be found in the films for
sale section, Wittners are in Germany and are at ;
www.wittner-cinetec.com, I'm sure that they should be able to help.Best of luck.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2